cylinder volume
英 [ˈsɪlɪndə(r) ˈvɒljuːm]
美 [ˈsɪlɪndər ˈvɑːljuːm]
气缸容积
双语例句
- One cylinder, labeled Physical Volume, has a grid drawn on it to represent the individual physical partitions ( PPs) on it.
标记为PhysicalVolume的一个柱面上绘制了一个网格，表示上面有单独的物理分区（PP）。 - Adopting uniaxial adjusted cylinder for fast and accurate volume adjustment.
采用单轴调节汽缸，能迅速精确调节所需之容量。 - Lo screw slot chassis ( cylinder) wall and stars constitute a closed volume of the tooth.
螺杆螺槽、机壳（气缸）内壁和星轮齿构成封闭容积。 - The utility model belongs to a measuring appliance, in particular to a precision measuring cylinder used for measuring the volume of an irregular solid.
本实用新型属于测量器具，尤其涉及测量不规则固体体积的精确量筒。 - Its selection method is given and the parameters called as COP and cylinder volume ratio and intermediate pressure for freezing food in deep temperature are analyzed.
在分析速冻食品在低温工况下的制冷系数、高低压容积比与中间压力的关系的基础上，给出了其选择方法并为合理选配制冷机提供了切实的指导。 - Four cylinder system, volume smaller, with more capability of lifting.
四油缸系统设计，使设备体积更小，举升力更大。 - Write a program to calculate square, sphere and cylinder surface area and volume.
编写一个程序计算正方形、球体和圆柱体的表面积和体积。 - Displacement indicates engine size, and compression ratio compares the total cylinder volume to compression chamber volume.
位移表明发动机的大小，和压缩比比较气缸总容积压缩室容积。 - Objective To investigate the electrical field distribution in the cylinder volume conductor with point source by means of experiment.
目的用实验探讨点电源圆柱形容积导体中的电场分布。 - Dued to the importance of the flow around the blunt bodies both in the theoretical study and in practice application, the two-dimensional numerical simulation for flow around square cylinder is performed, using pseudo-compressibility method and Finite Volume Method ( FVM) in the paper.
鉴于钝体绕流在理论研究和实践中所具有的重要意义，本文尝试采用人工可压缩方法和有限体积离散方法，实现对方柱绕流流场的数值模拟。 - Determination of the Cylinder Stroke Volume of the Reciprocating Pump
往复式真空泵气缸行程容积的确定 - This paper introduces the parameters of the quantitative packer, including its structure, model selection of cylinder, volume of storage bin, which has a packer control instrument composed of the PLC pneumatic device and the nucleus of embedded computer.
介绍了定量包装机的结构、气缸选型以及料仓容积等参数的计算。 - The calculation of the volume of gas storage tank was a approximately rough calculation using the calculation formula of cylinder volume in the past, it is not accurate.
过去对储气罐容积都近似地用圆柱体容积的计算公式来粗略计算，这样很不准确。 - The experimental result shows that higher bladder pressure decreases thickness of composite bearing cylinder, increases fiber volume fraction and improves the bending properties.
试验结果表明，气囊充压压力使复合材料承力筒的壁厚减薄，纤维体积含量增加，弯曲性能提高； - Microwave Imaging of Dielectric Cylinder Based on Volume Equivalence Principle
基于体等效原理的二维介质柱微波成像研究 - This paper presents the choice principle of the type, exhaust pressure of air compressor, range of main reservoir pressure, calculation and choice of cylinder volume of air compressor and cubic capacity of main reservoir that affects the ability of air supply on locomotive.
介绍了影响机车风源系统供风能力的空气压缩机型式、空气压缩机排气压力、总风缸压力范围的选取原则以及空气压缩机的排气量与总风缸容积的计算与选择方法。 - Aliena with bark and without bark amounted for 79.8% and 73.3%. This result proved that four parameter cylinder volume ratio stem profile has perfect fitness.
而带皮、去皮栎类依次为79.8%、73.3%，说明四参数柱干比曲线式具有较好的拟合性。 - This paper studies the base flow caused by the incompressible fluid past through the cylinder base. The control volume method of integral developed by D. B. Spalding and S. V. Patankar is used.
研究不可压缩流体流经圆柱体底部时，形成的底部流动，其数值方法可采用由D.B.Spalding、S.V.Patankar发展起来的控制体积分方法。 - To seek optimal accuracy value of final transmission for small tractor, the interior point penalty function is adopted. The least cylinder gear's volume is considered as its object function, computer aided design is carried out.
采用内点惩罚函数法寻求最优值，以小型拖拉机最终传动圆柱齿轮体积最小为目标函数对其进行计算机辅助设计。 - Analyse choice method of collision point of cylinder and shovel head and confirm initial pressure and volume of nitrogen chamber.
分析了活塞杆与铲头碰撞点的选择方法和氮气室的初始压力和初始容积的确定方法。 - The equations group of partition of storage volume in reservoir is established, and the relationship among parameters including partition pressure, volume of reservoir, vehicle cylinder volume available for fueling is revealed.
建立了储气库储气容积分区方程组，得到分区压力、储气库容积、可供汽车气瓶容积等参数之间的关系。 - By adopting the effective cylinder volume to measure the workspace and detailed analyzing the influence that the platform structure size brings to the workspace shape, the influence curve which the each parameter brings to the effective cylinder volume is given.
采用有效圆柱体体积来衡量工作空间，详细分析了平台结构尺寸对工作空间体积的影响，给出了各参数对有效圆柱体体积的影响曲线。 - Mainly study the speed characteristic and the influence of several key parameters such as valve timing, inlet air pressure of compressed air, cylinder volume, and stroke-bore ratio on the working characteristics.
工作特性主要研究了速度特性以及配气相位、压缩空气进气压力、气缸容积、程径比等参数对工作特性的影响。 - Different control logic tooling equipment required to complete only the cylinder volume and the corresponding quantity of the sensor can be generated with the corresponding fixture Advanced control logic.
不同工装的控制逻辑只需要填写工装上气缸数量和与之对应的传感器数量即可生成与工装夹具相对应的进阶控制逻辑。 - Collision frequency of ball was directly proportional to rotation speed of the mill and inversely proportional to ball density and cylinder volume. The influence of material mass on ball collision frequency was not significant.
磨球的碰撞频率与公转速度成正比，与磨球密度和球罐容积成反比，研磨物料质量对磨球碰撞频率的影响不显著。 - Average free path of ball movement was directly proportional to ball radius, ball density and cylinder volume and inversely proportional to material mass and charge ratio.
磨球运动的平均自由程与磨球半径、磨球密度、球罐体积成正比，与粉碎物料质量、球料比成反比。 - Miniaturization of engine is a method which will improve power, torque and efficiency of engine and reduce fuel consumption through the application of advanced technology with the premise of not increasing the cylinder volume.
发动机小型化是发动机通过应用先进技术在不增加气缸容积前提下，提高发动机的功率、扭矩和效率，降低油耗。 - Then it use set of dynamic system modeling, simulation, and analysis in one software MATLAB/ Simulink to establish cooling law, the instantaneous cylinder volume law, burning exothermic law modules package modeling.
再利用集动态系统建模、仿真、分析于一体的软件MATLAB/Simulink对柴油机的冷却规律、气缸瞬时体积规律、燃烧放热规律等模块等进行封装、建模。 - The catapult performance increases with the gas cylinder pressure, cylinder volume, ejection cylinder bore. ( 3) The pneumatic system, effect of damping holes on the performance of the system significantly.
弹射器的性能随着贮气瓶充气压力、贮气瓶容积、弹射气缸的缸径的增大而增强。（3）气动系统中，阻尼孔对系统性能的影响显著。